Wednesday, 13 July 2011

BrodBand and Bandwidth

Broadband High-speed voice, data, and video networked services that are digital, interactive, and packet based. The bandwidth is 384 Kbps or higher and 384 Kbps is widely accepted, as the minimum bandwidth required enabling full-frame-rate digital video.
Broadband Internet access, often shortened to just "broadband", is a high data rate connection to the Internet— typically contrasted with dial-up access using a 56k modem. Dial-up modems are limited to a bitrates of less than 56 Kbit/s (kilobits per second) and require the dedicated use of a telephone line — whereas broadband technologies supply more than double this rate and generally without disrupting telephone use.Bandwidth refers to the range of frequencies from the highest frequency signal element to the lowest.  The most common context in which the word bandwidth is used today involves computer networking.  When discussing computer networks and the Internet, bandwidth specifically refers to the data transfer rate.  The data transfer rate involves how much information can be transferred from point A to point B within a specified period of time.  Bandwidth is typically measured in bits per second, commonly known as bps.  Some broadband providers operate usage limits with their broadband deals. These are designed to not only help those who will require more or less broadband than others get the correct package and not have to pay more than they might have to and also to help with fair usage as some users use far more bandwidth than others. The amount of bandwidth you are allocated is based on demand.  If your computer is operating on a network, there is a certain amount of bandwidth given to that network.  When one computer is uploading and downloading large amounts of information, it uses a large amount of the bandwidth and other computers within the same network are allotted less bandwidth space. When there is only one computer connected and using bandwidth, the broadband connection and speed will be fully optimized.  Data rates are defined in terms of maximum download because network and server conditions significantly affect the maximum speeds that can be achieved and because common consumer broadband technologies such as ADSL are "asymmetric"—supporting much lower maximum upload data rate than download.

DSL (ADSL/SDSL)

DSL is a family of technologies that provides digital data transmission over the wires of a local telephone network. DSL originally stood for digital subscriber loop. In telecommunications marketing, the term Digital Subscriber Line is widely understood to mean Asymmetric Digital Subscriber Line (ADSL), the most commonly installed technical variety of DSL. DSL service is delivered simultaneously with regular telephone on the same telephone line. This is possible because DSL uses a higher frequency. These frequency bands are subsequently separated by filtering.

Multilinking Modems Roughly double the dial-up rate can be achieved with multilinking technology. What is required are two modems, two phone lines, two dial-up accounts, and ISP support for multilinking, or special software at the user end. This inverse multiplexing option was popular with some high-end users before ISDN, DSL and other technologies became available.

Load balancing takes two Internet connections and feeds them into your network as one double data rate, more resilient Internet connection. By choosing two independent Internet providers the load balancing hardware will automatically use the line with least load which means should one line fail, the second one automatically takes up the slack.

ISDN

Integrated Service Digital Network (ISDN) is one of the oldest broadband digital access methods for consumers and businesses to connect to the Internet. It is a telephone data service standard. Its use in the United States peaked in the late 1990s prior to the availability of DSL and cable modem technologies. Broadband service is usually compared to ISDN-BRI because this was the standard broadband access technology that formed a baseline for the challenges faced by the early broadband providers. These providers sought to compete against ISDN by offering faster and cheaper services to consumers.

Leased Lines

Leased lines are highly-regulated services traditionally intended for businesses that are managed through Public Service Commission’s (PSCs) in each state, must be fully defined in PSC tariff documents, and have management rules dating back to the early 1980s which still refer to teletypes as potential connection devices

What is VoIP?

VoIP, also known as IP Telephony, is the real-time transmission of voice signals using the Internet Protocol (IP) over the public Internet or a private data network.

In simpler terms, VoIP converts the voice signal from your telephone into a digital signal that travels over the Internet. One of the most significant advantages of VoIP (over a traditional public switched telephone network (PSTN - also known as a legacy networks) is that one can make a long distance phone call and bypass the toll charge. This integrated voice/data solution allows large organizations (with the funding to make the transfer from a legacy network to a VoIP network) to carry voice applications over their existing data networks.
Not only will this technological advancement have an impact on the large traditional telecommunications industry, it will alter the pricing and cost structures of traditional telephony.Furthermore, when compared with circuit-switched services (yet another name for legacy networks), IP networks can carry 5 to 10 times the number of voice calls over the same bandwidth.
Wireless VoIP theoretically has many advantages, including reduced cost for calls and higher-bandwidth data transfers versus a traditional cellular connection. WiFi networks cost a fraction of what traditional cell tower technology costs to deploy, and can be rolled out quickly without the detailed site reviews required to install radio towers. More importantly, wireless VoIP can actually dramatically improve call quality — especially in residential areas or office towers where traditional mobile network coverage is spotty. What does this mean for the average user? As the workforce moves to a flexible, non-static environment, wireless VoIP will allow employees to roam from mobile networks to WiFi-based home and office networks — using a single device to manage communications that currently traverses mobile, home, and office handsets. Within the United States, nearly five million homes already have a WiFi network installed — imagine if you could use the same handset both in your home for cheap IP-based calls, and then switch to cellular when you leave the building? Clearly, this technology has a lot to offer, from the enterprise to the average phone user.
Wireless VoIP offers potential savings by allowing companies to change the way they manage their phone systems. For example, instead of having voicemail, caller ID and e-mail separately, wireless VoIP will allow customers to retrieve all of their messages in one place, alleviating the pain of having different operators for different services and ultimately dealing with several bills at a time. Employees can also download software applications, enabling them to turn their phones into “mini-computers” and track inventory, or log onto the company’s intranet.
From a consumer perspective, the increased bandwidth from using a dual handset will potentially allow us to download video and movies, watch TV shows via on-demand technology and even video-conference with friends and family — all at speeds faster than cellular networks.

Thursday, 17 March 2011

Session Initiation Protocol And Voice over Telephony

SIP one of the very new but a mature player of the current VoIP industry....that handles the end to end session maintenance during VoIP packet transfers over the internet.
The Session Initiation Protocol (SIP), commonly used in VoIP phones (either hard-phones, or soft-phones), takes care of the setup and tear-down of calls, along with any changes during a call such as call transfers.
The purpose of SIP is to help two endpoints talk to each other (if possible, directly to each other). The SIP protocol is simply a signalling protocol, which means that its purpose is only to get the two endpoints talking to each other, and not to deal with the media of the call (your voice).Rather, your voice is carried using another protocol called the Real-Time Transport Protocol (RTP; RFC 3550) to transfer media directly between the two endpoints.
In the world of SIP, we call our endpoints user agents, of which there are two types:
Client and server.  
The client is the endpoint that generates the request, and the server processes the request and generates a response.
When an endpoint wishes to place a call to another endpoint (such as our soft-phone calling another soft-phone), we generate our request and send this to a SIP proxy. A proxy server will take the request, determine where the request is destined for, and forward it on.
Once the two user agents have negotiated a successful call setup, the media is transported via the RTP protocol and sent directly between the two user agents. SIP proxies do not handle media; they simply deal with the SIP packets.

Asterisk :Fuled up the Revolution

The industry is telecommunications, and the revolution is being fueled by an open source Private Branch exchanges (PBX) called Asterisk.
With Asterisk, no one is telling you how your phone system should work, or what technology you are limited to. If you want it, you can have it.
Asterisk lovingly embraces the concept of standards compliance, while also enjoying the freedom to develop its own innovations. What you choose to implement is up to you—Asterisk imposes no limits.
VoIP is that it allows voice to become nothing more than another application in the data network.
Asterisk is free software that transforms a computer into a communication server. Asterisk lets you build applications like PBX, VoIP gateway, IVR and ACD.

Asterisk As A PBX :Asterisk can be configured as the core of an IP or hybrid PBX, switching calls, managing routes, enabling features, and connecting callers with the outside world over IP, analog (POTS), and digital (T1/E1) connections
Asterisk as a Gateway: It can also be built out as the heart of a media gateway, bridging the legacy PSTN to the expanding world of IP telephony. Asterisk’s modular architecture allows it to convert between a wide range of communications protocols and media codec’s. Asterisk as a feature/media server.
Need an IVR? Asterisk’s got you covered. How about a conference bridge? Yep. It’s in there. What about an automated attendant? Asterisk does that too. How about a replacement for your aging legacy voice-mail system? Can do. Unified messaging? No problem. Need telephony interface for your web site? Ok.
Asterisk in the Call Center: Asterisk has been adopted by call centers around the world based on its flexibility. Call center and contact center developers have built complete ACD systems based on Asterisk. Asterisk has also added new life to existing call center solutions by adding remote IP agent capabilities, advanced skills-based routing, predictive and bulk dialing, and more.
Asterisk in the Public Network: Internet Telephony Service Providers (itsps), competitive local exchange carriers (CLECS) and even first-tier incumbents have discovered the power of open source communications with Asterisk. Feature servers, hosted services clusters, voice-mail systems, pre-paid calling solutions, all based on Asterisk have helped reduce costs and enabled flexibility.